Shelf System - Fisher Scientific Isotemp Series User Manual

Product Description
Work Space Components

Shelf System

The incubator is supplied with two perforated shelves. The shelf support rails [1] have an
alternating pattern of oblong and round perforations spaced evenly at 30 mm, allowing the
shelf support brackets [8] to be inserted without any room for error, yet in a very flexible way
to accommodate any required height of sample container. The shelves [2] have an integrated
tilt protection and pull-out stop. For details on using the shelf system, see
System"
[1]
[2]
[3]
[4]
Figure 4-8 Gravity Convection Shelf System
4-10 Gravity Convection Incubators
When accessories are to be operated in the work space of the
incubator, the ambient condition requirements must be observed (see
table below). The energy introduced into the work space has an impact
on the lower end of the temperature control range. When additional
heating sources are introduced into the work space, temperature control
may be adversely affected.
on page 5-1.
Retaining Springs
Support rails
Shelf support
Perforated shelves
Operating conditions
"Installing the Shelf
Fisher Scientific