Operation Section; Lifting And Storage - Perkins 1206A-E70TTA Operation And Maintenance Manual

30

Operation Section

Lifting and Storage

Operation Section
Lifting and Storage
Product Lifting
NOTICE
Never bend the eyebolts and the brackets. Only load
the eyebolts and the brackets under tension. Re-
member that the capacity of an eyebolt is less as the
angle between the supporting members and the ob-
ject becomes less than 90 degrees.
When it is necessary to remove a component at an
angle, only use a link bracket that is properly rated for
the weight.
Read all the information within product lifting before
any lifting is attempted. Ensure that the correct set of
lifting eyes for the assembly to be lifted have been
selected.
Use a hoist to remove heavy components. Use an
adjustable lifting beam to lift the assembly. All
supporting members (chains and cables) should be
parallel to each other. The chains and cables should
be perpendicular to the top of the object that is being
lifted.
Engine With Factory Installed
Radiator
i07297205
Illustration 25
Typical example
(1) Engine lifting eyes
Illustration 26
Typical example
M0090743
g06276749
g06276752