Bailey Approach Autograph Series Owner's Manual page 156

154
Heki Roof Lights
Using the Heki 2 roof light
Opening to the tilted position
1. Press the latches on both rotary bolts and
turn them 90° (A).
2. Hold the bracket in the middle and move it
out of the original position (B).
3. Tilt it downwards.
4. Push the acrylic dome upwards (C).
Opening the acrylic dome is supported by
the two gas springs after approx. 150 mm.
5. Swivel the bracket to the acrylic dome and
press it back into the original position (D).
To close it, follow the instructions in the
reverse order.
Opening to the half-way position
1. Press the latches on both rotary bolts and
turn them 90° (A).
2. Hold the bracket in the middle and move it
out of the original position (B).
3. Tilt it downwards.
4. Push the acrylic dome upwards (C).
Opening the acrylic dome is supported by
the two gas springs after approx. 150 mm.
5. Open both the latches (D).
6. Tilt the bracket to the half-way position.
7. Pull the acrylic dome down until the
bracket is lying in the holders.
8. Secure the bracket with both latches.
To close it, follow the instructions in the
reverse order.