Backup And Restore; Password Settings - Pilz PMI 5 Series Operating Manual

Putting into Service
7.2.1

Backup and restore

Program which you can use to save or restore an entire directory structure.
7.2.2

Password settings

Assign a password for the Control Panel to protect the settings in this area. Two levels can
be protected with different passwords.
Level 1: Master Control panel password
The whole Control Panel can be protected with a password.
Defining a password: Enter a password. Enter the password again under "Confirm pass-
word".
Change password: Same as for defining a password
Delete password: Deselect Ask for master password ....
If you select Ask for master password ..., then the system will request that the master pass-
word is entered before the Control Panel opens.
Timeout
If an incorrect password is entered three times or no valid password is entered within the
selected time, then the Control Panel is closed.
Operating Manual PMI 5
1002241-EN-07
29