Suzuki RV125 Service Manual page 94

3-58 ENGINE
CLUTCH COVER
• Install two dowel pins and new gasket 1.
• Tighten the clutch cover bolts and oil filter cap nut securely.
"
* Install the new gasket washer to the bolt A.
* Install the clamp to the bolt B.
STARTER MOTOR
• Install the starter motor.
NOTE:
Apply grease to the O-ring.
( 99000-25010: SUZUKI SUPER GREASE "A"
"
.
Use a new O-ring to prevent oil leakage.
GENERATOR COVER
• Install the starter idle gear 2, shaft and spacer.
• Install the dowel pin and new gasket 3.
• Tighten the generator cover bolts securely.