Pair (Air Supply) System; Pair Hose; Pair Control Valve - Suzuki RV125 Service Manual

PAIR (AIR SUPPLY) SYSTEM

PAIR HOSE

INSPECTION
• Inspect the PAIR hoses for wear or damage.
• Inspect the PAIR hoses are securely connected.

PAIR CONTROL VALVE

REMOVAL
• Disconnect the hoses and remove the PAIR control valve 1.
INSPECTION
• Inspect that air flows through the PAIR control valve air inlet
port A to the air outlet port B. If air does not flow out, replace
the PAIR control valve with a new one.
• Connect the vacuum pump gauge to the vacuum port of the
control valve as shown in the photograph.
• Apply negative pressure slowly to the control valve and
inspect the air flow. If air does not flow out, the control valve
and is in normal condition. If the control valve does not func-
tion, replace it with a new one.
$ Negative pressure range:
% 09917-47010: Vacuum pump gauge
"
Use a hand operated vacuum pump to prevent the
control valve damage.
INSTALLATION
Installation is in the reverse order of the removal.
–37.3 – –60.0 kpa (–280 – –450 mmHg)
ENGINE 3-65