Changing The Home City Summer Time Setting; Checking The Watch Charge Level; Connection; Connecting With A Phone - Casio 5603 Operation Manual

Changing the Home City
Summer Time Setting
1.
Y Tap the "OCEANUS Connected" icon.
2.
X Hold down (B) until the second hand
points to [C] twice.
This establishes a connection between
the watch and phone.
The second hand will point to [C] once
●
after about 0.5 seconds, and then a
second time after about 2.5 seconds.
3.
Y Perform the operation shown on the
phone screen to change your Home City
summer time setting.
Checking the Watch Charge
Level
Use the procedure below to check the current
charge level with OCEANUS Connected.
1.
Y Tap the "OCEANUS Connected" icon.
2.
X Hold down (B) until the second hand
points to [C] twice.
This establishes a connection between
the watch and phone.
The second hand will point to [C] once
●
after about 0.5 seconds, and then a
second time after about 2.5 seconds.
3.
Y Use OCEANUS Connected to check the
charge level.
Operation Guide 5603

Connection

Connecting with a Phone

This section explains how to establish a
Bluetooth connection with a phone that is
paired with the watch.
If the watch is not paired with the phone you
●
want to connect with, refer to the information
below and pair them.
C Pair the watch with a phone.
l
1.
Move the phone close to (within one meter
of) the watch.
2.
X Hold down (B) until the second hand
points to [C] twice.
This establishes a connection between
the watch and phone.
The second hand will point to [C] once
●
after about 0.5 seconds, and then a
second time after about 2.5 seconds.
Important!
If you have problems establishing a
●
connection, it could mean that
OCEANUS Connected is not running
on the phone. On the phone's Home
Screen, tap the "OCEANUS
Connected" icon. After the app starts
up, hold down the watch's (B) button
for at least 2.5 seconds.
Note
The connection will be terminated if
●
you do not perform any operation on
the watch or phone for a fixed amount
of time.
To specify the connection limit time,
perform the following operation with
OCEANUS Connected: "Watch
settings" n "Connection time". Next,
select a setting of 3 minutes, 5 minutes,
or 10 minutes.
Canceling a Connection with a
Phone
Pressing any button terminates the Bluetooth
connection and returns the second hand to its
normal operation.
Connected Disconnected
30
Using the Watch in a Medical Facility
or Aircraft
Whenever you are in a hospital, on an aircraft,
or in any other location where auto time
calibration signal receive or connection with a
phone may cause problems, you can perform
the procedure below to disable such
operations. To re-enable auto time
adjustment, perform the same operation
again.
1.
Y Tap the "OCEANUS Connected" icon.
2.
X Hold down (B) until the second hand
points to [C] twice.
This establishes a connection between
the watch and phone.
The second hand will point to [C] once
●
after about 0.5 seconds, and then a
second time after about 2.5 seconds.
3.
Y Perform the operation shown on the
phone screen to enable or disable auto
time adjustment.
30
12