Casio 5603 Operation Manual page 19

I can't pair the watch with a
phone.
Q1
I've never been able to establish a
(pairing) connection between the
watch and phone.
Are you using a supported phone model?
Check if the phone model and its
operating system are supported by the
watch.
For information about supported phone
models, visit the CASIO Website.
https://world.casio.com/os_mobile/wat/
Did you install OCEANUS Connected on
your phone?
OCEANUS Connected needs to be
installed on your phone in order to
connect with the watch.
A Install the required app on your
l
phone.
Are your phone's Bluetooth settings
configured correctly?
Configure the phone's Bluetooth settings.
For details about setting procedures, see
your phone documentation.
iPhone Users
"Settings" n "Bluetooth" n On
●
"Settings" n "Privacy" n "Bluetooth
●
Sharing" n "OCEANUS Connected" n
On
Android Users
Enable Bluetooth.
●
Other than the above.
Some phones need to have BT Smart
disabled to use OCEANUS Connected.
For details about setting procedures, see
your phone documentation.
On the Home Screen, tap: "Menu" n
"Settings" n "Bluetooth" n "Menu" n "BT
Smart settings" n "Disable".
Operation Guide 5603
I can't reconnect the watch
and phone.
Q1
The watch will not re-connect with the
phone after they are disconnected.
Is OCEANUS Connected running?
The watch cannot re-connect with the
phone unless OCEANUS Connected is
running on the phone. On the phone's
Home Screen, tap the "OCEANUS
Connected" icon. Then on the watch, hold
down (B) until the second hand points to
[C] twice.
The second hand will point to [C] once
●
after about 0.5 seconds, and then a
second time after about 2.5 seconds.
Have you tried turning your phone off and
then back on again?
Turn the phone off and then back on, and
then tap the "OCEANUS Connected"
icon. Next, on the watch, hold down (B)
until the second hand points to [C] twice.
The second hand will point to [C] once
●
after about 0.5 seconds, and then a
second time after about 2.5 seconds.
Q2
I can't connect while my phone is in
the Airplane Mode.
Connection with the watch is not possible
while the phone is in the Airplane Mode. After
exiting the phone's Airplane Mode, go to the
phone's Home Screen and tap the
"OCEANUS Connected" icon. Then on the
watch, hold down (B) until the second hand
points to [C] twice.
The second hand will point to [C] once after
●
about 0.5 seconds, and then a second time
after about 2.5 seconds.
Q3
On the watch, enable auto time adjustment,
and then hold down (B) until the second hand
points to [C] twice.
The second hand will point to [C] once after
●
about 0.5 seconds, and then a second time
after about 2.5 seconds.
Using OCEANUS Connected to Configure
l
Settings
Using Watch Operations to Configure
l
Settings
30
Q4
On the phone, turn Bluetooth off and then back
on, and then tap the "OCEANUS Connected"
icon on the Home Screen. Next, on the watch,
hold down (B) for until the second hand points
to [C] twice.
The second hand will point to [C] once after
●
about 0.5 seconds, and then a second time
after about 2.5 seconds.
30
Q5
Turn on the phone and then tap the
"OCEANUS Connected" icon. Next, on the
watch, hold down (B) until the second hand
points to [C] twice.
The second hand will point to [C] once after
●
about 0.5 seconds, and then a second time
after about 2.5 seconds.
30
I can't establish a connection after
disabling the watch's auto time
adjustment feature.
30
I changed the phone's Bluetooth
from enabled to disabled, and now I
can't connect anymore.
30
I can't connect after turning off the
phone.
30
19