Swapping Your Home City Time And World Time; Stopwatch; Measuring Elapsed Time; Adjusting Hand And Day Indicator Alignment - Casio 5603 Operation Manual

Swapping Your Home City
Time and World Time
In the World Time Mode, hold down (A) for
about three seconds to swap your Home City
time with your World Time.
Before swapping After swapping
Home Time
World Time
30
World Time
Home Time
If a swapping operation causes a change in
●
the day indicator setting, the mode hand will
rotate repeatedly.
Hand and Day Indicator Movement
l
Note
This function comes in handy when
●
you need to move to another time
zone. For details about how to use it,
go to the section below.
Moving to Another Time Zone
l
Operation Guide 5603

Stopwatch

The stopwatch measures elapsed time in units
of one second up to 23 hours, 59 minutes, 59
seconds (24 hours).
30

Measuring Elapsed Time

Hours
Minutes
Hour (24-hour time)
1.
Enter the Stopwatch Mode.
Navigating Between Modes
l
2.
Push the crown back in.
3.
Use the operations below to measure
elapsed time.
4.
Press (B) to reset the elapsed time to all
zeros.
Pulling out the crown while an elapsed
●
time measurement operation is in
progress will reset the displayed value
to all zeros.
Seconds
30
A
Start
A
Stop
A
Resume
A
Stop
Note
The (B) button operations below can
●
be performed while an elapsed time
measurement operation is in progress.
Connecting with a Paired Phone to
ー
Adjust the Watch's Time
Time Adjustment Using a Time
ー
Calibration Signal
Pairing or Re-pairing the Watch with
ー
a Phone
Searching for a Paired Phone
ー
Resetting the stopwatch to all zeros
●
causes the second hand to move
momentarily to 12 o'clock. After 10
seconds, it will start indicating the
current timekeeping seconds.
The mode hand points to [ST] while an
●
elapsed time measurement operation
is in progress. The mode hand points
to the Home City day of the week while
the stopwatch is reset to all zeros.
Adjusting Hand and
Day Indicator

Alignment

Strong magnetism or impact can cause the
hands and/or the day indicator to go out of
alignment. If this happens, adjust hand and
day indicator alignment.
The watch performs alignment of the hour
●
hand, minute hand, second hand, and 24-
hour hand automatically.
14