Remaining Battery Level Indications; Turning The Scanner On And Off - Denso SE1-BB User Manual

2.2 Remaining Battery Level Indications

The remaining battery level can be checked by lighting of the indicator LED by pressing the magic key quickly.
The remaining battery level is displayed in three stages.
The indicator LED lights twice when LR6 (AA) alkaline battery is set and once when AA rechargeable nickel hydride battery
is set.
Battery level 40% or more
39% to 10%
Less than 10%
Note:
· The remaining battery level is not an accurate indicator.
Use this purely as an approximate indicator.
· Correctly set the type of battery.

2.3 Turning the Scanner On and Off

Turning the scanner on
When the scanner is turned off, pressing the magic key will start the Bluetooth
* Using the scanner when "End operation" is selected requires first reading the "Start operation" Bar Code symbol given in
Section 11.2 according to the procedure in Section 11.1. (When the scanner is turned on, pressing the trigger switch will
®
start the Bluetooth wireless link.)
Turning the scanner off
When the scanner is not used for a long time, turn the scanner off by holding the trigger switch and the magic key down for
three seconds or more.
Auto power-off
The timeout period for automatically turning the scanner off when it has not been used for a long time can be set within the
range 5 to 640 minutes in 5-minute increments. Auto power-off can also be set to disabled. This function can be set up only
on the configuration software (Scan Tune App).
Lights in green.
Lights in orange.
Lights in red.
4
®
wireless link.