Using Chorus; Using Brilliance; Adjusting Acoustic Piano Sound Characteristics (Acoustic Simulator - Casio Privia PX-S3000 User Manual

Using Chorus

Chorus is a function that adds depth and breadth to notes.
To select a chorus setting, use FUNCTION parameter
("Chorus Type") to select one of the settings below.
Setting this
Selects this chorus type (displayed):
value:
Tone Tone*
1 Chorus 1
2 Chorus 2
3 Chorus 3
4 Chorus 4
5 FB Chorus
6 Deep Chorus
7 Flanger 1
8 Flanger 2
9 Flanger 3
10 Flanger 4
11 Short Delay 1
12 Short Delay 2
* Specifies the initial setting of each tone.
For information about FUNCTION parameters, see
"Configuring Function Settings (FUNCTION
EN-53).

Using Brilliance

Brilliance can be used to make a sound brighter or mellower.
You can use FUNCTION parameter
brilliance within the range of –3 to +3. A setting of +1 or
greater gives notes a brighter feel, while –1 or less makes
notes sound more mellow. For information about FUNCTION
parameters, see "Configuring Function Settings (FUNCTION
Mode)" (page EN-53).
9
Mode)" (page
10 ("Brilliance") to adjust
Adjusting Acoustic Piano Sound
Characteristics (Acoustic
Simulator)
The tones of your Digital Piano have built-in elements that
give them the reverberation characteristics of an acoustic
piano. You can use the procedure below to adjust the
characteristics of notes.
■ To adjust acoustic piano sound characteristics
1.
Hold down the bp^ button until "[FUNCTION]"
appears on the display.
This enters the FUNCTION Mode.
2.
Use the bk U and bl I buttons to select the
following menu items in sequence: "SOUND"
3 "ACOUSTIC SIMU.".
3.
Use the bk U and bl I buttons to display the
setting item you want to configure and then
touch bm ENTER.
• For more information about setting items and their
settings, see the "List of Acoustic Piano Sound Setting
Items" (page EN-26).
4.
Use the bk – and bl + buttons to change the
setting.
5.
Touch bp EXIT.
6.
Repeat steps 3 through 5 for each of the items
whose setting you want to configure.
7.
To exit the FUNCTION mode, hold down
bp EXIT until "[FUNCTION]" disappears from
the display.
Digital Piano Operations
EN-25