Casio Privia PX-S3000 User Manual page 10

■ Connectable Expression Pedals
• Maximum resistance value: 10kΩ±20% to 50kΩ±20%
• Use of a pedal whose operation has been confirmed (see
below) is recommended.
Operation Confirmed Pedals (Polarity Type 2)
Roland EV-5 (Set minimum volume to 0.)
KURZWEIL CC-1
FATAR VP-25, VP-26
■ To specify the pedal type
You can use FUNCTION parameter
select one of the settings below.
Select this
setting
To connect this type of pedal:
(displayed
setting name):
1. SW Switch type pedal (CASIO sustain
pedal)
2. Exp.Type1 Polarity Type 1 (see the illustration
below) expression pedal
3. Exp.Type2 Polarity Type 2 (see the illustration
below) expression pedal
• Note that the expression pedal polarity type depends on the
manufacturer. When connecting an expression pedal,
select "2. Exp.Type1" or "3. Exp.Type2" in accordance with
its polarity type.
• For information about FUNCTION parameters, see
"Configuring Function Settings (FUNCTION
EN-53).
41 ("Pedal Type") to
Mode)" (page
■ To specify the pedal function
You can use FUNCTION parameter
select one of the settings below. A setting value of 1 to 4 is
appropriate for an expression pedal, while a value from 5 to
10 is appropriate for a switch type (CASIO sustain) pedal.
Select this
setting
To assign this function to the pedal:
(displayed
setting name):
1. Expression Expression (MIDI Control Change 11)
control
2. Master Volume Overall Digital Piano volume level
control
3. Tempo Tempo control
4. Layer Balance Upper1 part and Upper2 part volume
level balance control
5. Sustain
6. Sostenuto
Same as "Sustain" to "Fill-in" under
7. Soft
change the function of the pedal
connected to the DAMPER PEDAL
8. Arpeggio Hold
jack" (page EN-7).
9. Play/Stop
10. Fill-in
• For information about FUNCTION parameters, see
"Configuring Function Settings (FUNCTION
EN-53).
Overview and Setup
42 ("Pedal Target") to
"To
Mode)" (page
EN-9