PX - S3000 Bluetooth, Audio Device, and Computer Connection Guide Contents Using the Digital Piano as a Bluetooth Speaker System ...........EN-1 Playing Sound from External Audio Equipment Through the Digital Piano’s Speakers .
• Step 3 below will execute the clear operation. If you On the Bluetooth setting screen on the external want to cancel the clear operation at this point, touch device, select “CASIO Privia” (this Digital – here. Piano). To execute the clear operation, touch •...
Playing Sound from External External Input Volume Audio Equipment Through the Adjustment and Center Cancel Digital Piano’s Speakers When you are playing audio from an external source through the Digital Piano’s speakers, you can adjust the volume level Connection requires commercially available connecting cords, and even perform center cancel, which cuts the vocal part.
■ Connecting to Audio Equipment (Figure Outputting Digital Piano Notes Use commercially available cables to connect the external Through an Amp or Audio audio equipment to the Digital Piano’s LINE OUT jacks as shown in Figure . LINE OUT R jack output is right channel Equipment sound, while LINE OUT L/MONO jack output is left channel sound.
Configure the music software settings to select • Never connect to a computer that does not conform to “CASIO USB-MIDI” as the MIDI device. the above requirements. Doing so can cause problems with your computer. • For information about how to select the MIDI device, see the user documentation that comes with the music software you are using.