Table of Contents
Advertisement
Digital Piano Operations
● Reverb
Type (displayed)
Description
5. Room 1
6. Room 2
Simulates the reverberation of a room.
7. Room 3
8. Large Room
9. Hall 1
Simulates the reverberation of a small
10. Hall 2
hall.
11. Hall 3
12. Stadium
Simulates the reverberation of a
stadium.
• To return to the initial default setting (Hall 3), touch
bk – and bl + at the same time.
4.
After the setting is the way you want, touch
bp EXIT as many times as required until
"[SOUND MODE]" disappears from the display.
■ To adjust the depth of the hall simulator/reverb
effect
1.
Hold down bn SOUND MODE until "[SOUND
MODE]" appears on the display, and then
release the button.
2.
Use the bk U and bl I buttons to display one
of the setting items below and then touch
bm ENTER.
With this menu
You can do this:
item (displayed):
Hall/Rev. Depth
Adjust the depth of the Hall Simulator
and Reverb effects applied to the
Digital Piano's sound source.
AudioInHallDepth
Adjust the depth of the Hall Simulator
and Reverb effects applied to the
external input audio (Bluetooth input or
ct AUDIO IN jack input).
3.
Use the bk – and bl + buttons to change the
setting.
• You can specify a value from 0 to 127. The larger the
value, the greater the effect depth.
4.
When the setting you want is selected, touch
bp EXIT.
5.
Repeat steps 2 through 4 as required.
6.
After the setting is the way you want, touch
bp EXIT.
EN-22
■ To specify the Surround type
1.
Hold down bn SOUND MODE until "[SOUND
MODE]" appears on the display, and then
release the button.
2.
Use the bk U and bl I buttons to display
"Surround Type" and then touch bm ENTER.
The name of the currently selected surround type will be
shown on the display.
3.
Use the bk – and bl + buttons to select the
surround type (Type 1 or Type 2).
4.
After the setting is the way you want, touch
bp EXIT as many times as required until
"[SOUND MODE]" disappears from the display.
Advertisement
Table of Contents
