Table of Contents
Advertisement
7.19
Portamento Control(54H)
Message Format:
BnH 54H vvH
n:
MIDI Channel Number
vv:
Source Key Number
Receive Receipt of this message first stores the Source Note Number for the next note. When the next
Note On is received, the portamento effect is applied to the note using this Source Note Number as the
pitch start point and the Note On event key number as the end point. If there already is a note being
sounded by Source Note Number at this time, the new note on is not performed and the portamento
effect is applied to the pitch of the note being sounded. That is to say that legato play is performed.
7.20
High Resolution Velocity Prefix (58H)
Message Format:
BnH 58H vvH
n:
MIDI Channel Number
vv:
Value
Transmit
When Hi-Reso Velocity MIDI Out of this unit's MIDI setting is On, sends the lower seven
bits of 14-bit Velocity when a key is pressed or released.
Receive
Receipt is handled, in combination with the following Note On/Off message, as the lower
seven bits of 14-bit Velocity. (Note1)
For information about the relationship between the Note On/Off message and High Resolution Ve-
locity Prefix message, see "Instrument Velocity Resolution" at the beginning of part II.
7.21
Reverb Send Level (5BH)
Message Format:
BnH 5BH vvH
n:
MIDI Channel Number
vv:
Value
Transmit Sent when GM tone is selected.
Sent when the knob or pedal is operated by setting. (PX-S3100)
Sent when MIDI setting of Accomp Out set to ON and when automatic accompaniment is used.
(PX-S3100)
Transmit Sent when the knob or pedal is operated by setting. (PX-S3100)
Receive Receipt changes the reverb send of the corresponding part.
7.22
Chorus Send Level (5DH)
Message Format:
BnH 5DH vvH
n:
MIDI Channel Number
vv:
Value
13
Advertisement
Table of Contents
