Table of Contents
Advertisement
Using a Computer to Copy
General Song Data to a USB Flash
Drive
You can use the same operations as those for built-in songs
to play back files of the formats below, which are stored in the
MUSICDAT folder.
• Standard MIDI files (SMF format 0/1) or CASIO MIDI files
(CMF format)
1.
Connect the USB flash drive to your computer.
2.
Create a folder named MUSICDAT in the root
directory of the USB flash drive.
• This step is not required if there is already a
MUSICDAT folder in the USB flash drive's root
directory.
3.
Copy song data you want to play back on the
Digital Piano to the MUSICDAT folder.
• For information about the song data playback
operation, see
"Listening to Songs (MIDI
(page EN-51).
Storing Standard Audio Data
(WAV Files) to a USB Flash Drive
Performing a record operation with the Digital Piano's audio
recorder creates a folder named MUSICDAT on the USB flash
drive. WAV files are stored in the MUSICDAT folder,
automatically assigning them names from TAKE01.WAV to
TAKE99.WAV. You also can connect a USB flash drive to a
computer and change the names of audio data (WAV) files to
the format "TAKEXX*.WAV", and move them to the
MUSICDAT folder. Then you will be able to play them back on
the Digital Piano.
* XX = 01 to 99
Supported WAV format (Linear PCM, 16bit, 44.1 kHz, stereo)
Linking with a Smart Device
(APP Function)
You can use the APP Function to connect the Digital Piano
with a phone, tablet or other smart device and perform the
operations described below.
• Control the Digital Piano from a smart device (Piano
Remote Controller)
• Transfer music data from a smart device
• Put the mobile device you will connect with into its
Airplane Mode or otherwise disable device
communications.
• When connecting a smart device to the Digital Piano,
do not connect both a USB cable and an audio cable at
the same time.
■ To download the smart device app
Download the Chordana Play for Piano app from the CASIO
website and install it on the smart device.
https://support.casio.com/global/en/emi/manual/PX-S3000/
Player)"
■ To link to a smart device
After installing the Chordana Play for Piano app on a smart
device, use a commercially available USB cable to connect
the smart device's USB port with the Digital Piano's USB port.
After connecting the smart device to the Digital Piano, use the
smart device app to perform operations. For details about
operations, refer to the user documentation of the app.
EN-65
Advertisement
Table of Contents
