Table of Contents
Advertisement
Digital Piano Operations
Changing the Auto
Accompaniment and Song Tempo
There are two ways to change the tempo (beats per minute)
setting: using buttons to specify a tempo value, and tapping a
beat with a keyboard key or a pedal.
• You can specify use of a letter (T) or an icon (2) as the
display indicator to the left of the tempo value. To specify
the indicator type, use FUNCTION parameter
Indicator"). For information about FUNCTION parameters,
see
"Configuring Function Settings (FUNCTION
(page EN-53).
■ To specify a tempo value
1.
Touch bm TEMPO.
The current tempo value will be shown on the display.
[
]
T E M P O
1 2 0
T : 1 2 0
2.
Use the bk – and bl + buttons to adjust the
tempo value.
• You can specify a tempo value in the range of 20 to
255.
• To return the currently selected song, rhythm pattern,
or music preset to its recommended tempo setting,
touch bk – and bl + at the same time.
3.
To exit the setting screen, touch bm TEMPO or
bp EXIT.
■ To use the keyboard key or a pedal to adjust the
tempo
1.
Hold down the bm TEMPO button.
This causes "TAP" to appear to the right of [TEMPO] on
the display.
2.
Press a keyboard key or a pedal at least twice
in succession.
• This will set a tempo that corresponds to the speed at
which you pressed the keyboard key or pedal.
3.
Release bm TEMPO.
• You can use the above steps to set an approximate
tempo and then use the steps under
tempo
value" to fine tune the setting.
• Note that an expression pedal cannot be used to set a
tempo using the above procedure.
EN-38
Selecting a Music Preset instantly changes the Digital Piano
to a preset setup (tone, rhythm, chord progression, etc.) for
play of songs of various genres/categories. The press of a
button sets up the Digital Piano so those songs sound exactly
the way you thought they should. See the separate "Built-in
Music Data Lists" for a complete list of the 310 Music Presets
that are available.
■ To perform using a music preset
108
("Tempo
1.
Mode)"
2.
3.
Music preset number
"To specify a
Using Music Preset
Use the 3 mode selector button to cycle
through setting until the "RHYTHM" or
"ACCOMP" indicator is lit.
Use the bp^ button to cycle through settings
until the "^RHYTHM" indicator to the right of
the button is lit.
Hold down the bq POPS button until "[MUSIC
PRESET]" appears on the display.
This enters the Music Preset Mode and causes the 3
mode selector button "ACCOMP" indicator to flash.
[
M U S I C P R E S E T
0 0 1 : S o f t P o
T : 1 2 4
• The name and number of the currently selected music
preset will be shown on the display.
• This enters synchro start standby, which is indicated
by the flashing yellow and red LEDs above the
8 START/STOP button.
or
]
p
Music preset name
Advertisement
Table of Contents
