Using The Pitch Bend Wheel; Using The Arpeggiator - Casio Privia PX-S3000 User Manual

■ To initialize all parameter settings that can be
configured with knob operations
• The procedure below returns all parameter settings in the
"Knob Set List" (page EN-76) to the Digital Piano's initial
defaults.
1.
Use the bp^ button to cycle through settings
until the "^CTRL" indicator to the right of the
button is lit.
2.
Hold down the bs KNOB button until "Sure?"
appears on the display.
3.
To initialize, touch bl +. To exit this operation
without initializing, touch bk –.

Using the Pitch Bend Wheel

You can use the pitch bend wheel to slide the pitch
of notes smoothly upwards and downwards. This
capability makes it possible to reproduce
saxophone and electric guitar choking effects.
1.
While playing a note on the keyboard,
rotate the cn PITCH BEND wheel on
the left of the keyboard upwards or
downwards.
The amount the note bends depends on how
much you rotate the pitch bend wheel.
• Do not touch the wheel as you turn on the
keyboard.
• You can use FUNCTION parameter
specify the amount of pitch change at maximum rotation in
either direction. For information about FUNCTION
parameters, see "Configuring Function Settings
(FUNCTION Mode)" (page EN-53).
52 ("P Bend Range") to

Using the Arpeggiator

With the arpeggiator, you can play various arpeggios and
other phrases automatically by simply pressing keys on the
keyboard. You can select from a number of different arpeggio
options, including playing arpeggios from a chord, playing
various phrases automatically, and more.
• A single button is used to control the arpeggiator and auto
harmonize (page EN-37). Because of this, auto harmonize
cannot be used while the arpeggiator is in use.
■ To enable the arpeggiator
• If "AH" appears instead of "AR" when you touch the
bt ARPEG. button in step 2 of the procedure below,
you will need to change the function assigned to the
bt ARPEG. button. Select "Arpeggiator" for
FUNCTION parameter
information about FUNCTION parameters, see
"Configuring Function Settings (FUNCTION
(page EN-53).
1.
Use the bp^ button to cycle through settings
until the "^CTRL" indicator to the right of the
button is lit.
2.
To enable the arpeggiator, touch bt ARPEG.
This will cause "AR" to appear on the display.
[ C T R L ] K N OB
0 1 : F i l t e r
T : 1 2 0
• Playing a chord or single note on the keyboard will
play back the currently selected arpeggio.
Digital Piano Operations
78 ("Type Select"). For
Mode)"
A R
EN-27