Table of Contents
Advertisement
The correct temperature
Temperature display
In normal operation the upper temper-
ature display shows the average, cur-
rent temperature in the refrigerator
section and the lower temperature
display the highest temperature in
the freezer section.
Depending on the ambient temperature
and the temperature setting, it can take
the appliance a few hours to reach the
temperature required and for this tem-
perature to then be shown as a con-
stant temperature in the display.
If the temperature in the freezer
remains above -18 °C for a long
time, check that the frozen food has
not started to defrost.
If it has, check that the food is safe
to use and if it is, then use it as soon
as possible or cook it before freezing
it again.
26
Setting the temperature
Use the and arrow sensors to
set the temperature higher or lower.
The following information shows in the
display while the sensors are being
touched:
– Touching a sensor once: the last
temperature selected flashes.
– Each subsequent touch of the
sensor: adjusts the temperature
shown in 1 °C increments.
– Keeping a finger on the sensor
changes the temperature continu-
ously.
Approximately 5 seconds after the last
time a sensor has been touched, the
current temperature inside the appli-
ance is automatically shown.
Hide quick links:
Advertisement
Table of Contents
