Temperature Display; Setting The Temperature; Possible Temperature Settings - Miele K 4323 ED ws Operating Instructions Manual

Temperature display

In normal operation, the temperature
display shows the current average
refrigerator section temperature in-
side the refrigeration appliance.
Depending on the ambient temperature
and the temperature setting, it can take
the appliance a few hours to reach the
temperature required and for this tem-
perature to then be shown as a con-
stant temperature on the display.

Setting the temperature

 Touch the OK sensor control on the
control panel.
 will appear in the display.
 Touch OK.
 Use the  and  sensor controls to
change the temperature.
 Touch OK.
The temperature display changes back
to the actual temperature that is cur-
rently in the refrigeration appliance.

Possible temperature settings

- Refrigerator section: 2 to 9 °C
The correct temperature
If you change the temperature set-
ting:
 check the temperature display after a
few hours. It will take this long for the
appliance to give an accurate read-
ing.
- Wait for approx. 6 hours if the refri-
geration appliance is not very full
- Wait for approx. 24 hours if the refri-
geration appliance is full
If, after this time, the temperature is still
too high or too low:
 Adjust the temperature again.
47