Table of Contents
Advertisement
Selecting further settings
Selecting further settings
In Settings mode certain settings can
be adjusted and functions selected, al-
lowing you to adjust the appliance to
suit your requirements.
See the following pages for more in-
formation on these settings.
The door alarm or any other alarm are
automatically suppressed when you
are in Settings mode. No alarm will
sound. Exception: If there is an appli-
ance fault (F+numbers), Settings
mode will be exited automatically. The
fault code will be shown in the display
and an alarm will sound (see "Problem
solving guide - - Display warnings").
The freezer section control panel (to
the right-hand side of the display)
must be used to apply the desired set-
tings.
32
Settings overview
Switching Sabbath mode on and
off
Setting display brightness
Changing the temperature unit
(°C/°F)
Activating or deactivating the lock
Sabbath mode
The appliance offers a Sabbath pro-
gramme for the purposes of religious
observance.
The following are switched off:
– the interior lighting when the door is
opened,
– all acoustic and visual signals,
– temperature displays,
– DynaCool, Super cool and Super
freeze (if previously selected).
When Settings mode is activated the
Super freeze control can still be selec-
ted.
The Sabbath mode function will switch
off automatically after approx.
120 hours.
Ensure that the doors are properly
closed, as visual and audible alarms
are switched off.
Any power failure during this time is
not shown in the display. After a
power failure the appliance restarts in
Sabbath mode.
Hide quick links:
Advertisement
Table of Contents
