Replace panel onto the soft-close
mechanism from above, clicking it
back into place first at the bottom
and then at the top.
Close the lower door.
Changing the door hinging
Refitting the upper door
Fit the upper door onto hinge pin
in the middle of the appliance.
Close the upper door.
0
2
3
Fit hinge plate on the opposite
side and secure it in place with
screws .
Tip: If necessary, drill holes for the
screws.
Refit cover on the opposite side.
Align the appliance door with the ap-
pliance housing using the slots in the
lower hinge plate. Then tighten the
screws.
79