Changing The Door Hinging - Miele KFN 15842 D edt/cs Operating And Installation Instructions

Changing the door hinging

The appliance is supplied right-hand
hinged. If left-hand hinging is required,
the hinges must be changed.

Two people are needed for chan-
ging the door hinging.

If a door seal is damaged the
door will not close properly and cool-
ing performance will be reduced.
Condensate will build up in the in-
terior and this can cause a build-up
of ice.
Do not damage the door seal.
Preparing to change the door hinging
To change the door hinging, you will
need the following tools:
 Place a suitable cover on the floor in
front of the appliance to protect the
appliance doors and your floor from
damage.
 Remove the shelves/bottle shelf from
the appliance door.
70
Removing the door handles
 When you pull the door handle , the
sidebar  slides back.
 Pull sidebar  firmly to the back out
of the guides on the mounting plate.
 Now loosen the four screws (TX15) in
the mounting plate and remove the
handle.
 Remove the cover caps from the op-
posite side, and fit them into the
empty holes.