Group Tune; Group Tune Setup - Lectrosonics D2 DSQD Instruction Manual

Group Tune

Assign a tuning group to a channel.

Group Tune Setup

Tuning groups allow the user to set up a list of frequen-
cies, allowing for easy tracking of frequency tuning in
the transmitters.
• Four tuning groups are available, U, V, W, X.
• For each group, choose channel and frequency,
and choose to enable or disable the frequency.
• Each group can store up to 32 frequencies.
Use MENU/SEL to set and move cursor and the UP
and DOWN arrows to change values.
When a tuning group is assigned, the frequency control
is limited to the frequencies contained in the tuning
group. It also limits the available frequencies in the
frequency coordination process.
Rio Rancho, NM
Digital Receiver
9