Verify Transmitter Configuration Using A Field Communicator - Emerson Rosemount 2088 Quick Start Manual

February 2019
5 Verify transmitter configuration using a Field
Communicator
Verify the configuration using any HART
option code M4. Configuration instructions for a Field Communicator and LOI
are included in this step. See
configuration instructions using AMS Device Manager.
A Rosemount
verify configuration. Fast Key sequences vary depending on device and DD
revisions. Use the
Communicator user interface
Key sequences.
5.1 Determine Fast Key sequence table for the Field
Communicator user interface
Procedure to determine the Fast Key sequence table for the Field
Communicator
Procedure
1. Connect Field Communicator to Rosemount
2. If Home screen matches
sequences.
3. If Home screen matches
Emerson
functionality. Visit
Figure 5-1: Traditional Interface
Quick Start Guide
Rosemount 2088 Reference Manual
™
2088 DD must be installed on the Field Communicator to
Determine Fast Key sequence table for the Field
a) Perform Fast Key sequence 1,7,2 to identify Field Revision and
®
HART Revision.
b) Refer to Table 5-2
Field Revision and HART Revision for Fast Key sequences.
™
recommends installing the latest DD to access the complete
Emerson.com
®
capable configuration tool or LOI -
process below to identify the appropriate Fast
Figure 5-1, refer to
Figure 5-2:
and the appropriate column based on your
or FieldCommGroup.org.
Quick Start Guide
for
™
2088, 2090F, or 2090P.
Table 5-1 for Fast Key
15