Inputs; Table 23 Meas_Acceleration: Input Parameters - Infineon SP37 Function Manual

2.4.4

Inputs

Table 23 Meas_Acceleration: Input Parameters
Register / Address
R6 (MSB)
R7 (LSB)
R5
R3
*(AccelResult+2)
ROM Library Function Guide
Type Name
unsigned int SensorConfig
unsigned char SampleRate
signed int AccelResult
idata*
signed int Raw Temperature Previous Raw Temperature value can optionally
Tire Pressure Monitoring Sensor
Description
Defines Sensor Configuration (refer to
and Table 25)
Defines the number of system clock cycles
(12 MHz RC Oscillator) divided by 8 which is
waited between consecutive measurements.
Note: Only applicable if SensorConfig.2-0
[2POWN2:0] greater than 1 Sample
Pointer to an integer array in RAM to receive the
measurement result
be used as input parameter. Refer to bit
RAWTemp in SensorConfig.
46
SP37
ROM Library Functions
Table 24
Revision 1.0, 2011-12-15