Outputs; Resource Usage; Execution Information; Table 134 Writeflashcodesectorline: Output Values - Infineon SP37 Function Manual

2.31.5

Outputs

Table 134 WriteFlashCodeSectorLine: Output values
Register/ Address
R7
2.31.6

Resource Usage

Table 135 WriteFlashCodeSectorLine: Resources
Type
Registers
SFR
Stack
1) Two additional bytes, not included here, are needed to call the library function
2.31.7

Execution Information

Table 136 WriteFlashCodeSectorLine: Execution Time and Charge Consumption
Parameter
Execution Time
Charge Consumption
ROM Library Function Guide
Type Name
signed char Statusbyte
Used or Modified
R0, R1, R2, R3, R4, R5, R6, R7
ACC, PSW, DPTR, CFG1, TCON, TMOD, TH0, TL0, TH1, TL1, DSR, CRC0, CRC1,
CRCD, CRCC, DIVIC
1)
5 Bytes
Symbol Values
Min. Typ.
t
– 3850
Q
– 7,857
Tire Pressure Monitoring Sensor
Description
0: success
-1: Lockbyte 2 is set (Code Sector Lock), without
writing anything; or the function was called while
the device is in debug Mode.
-2: After data verification, errors are detected
-3: The StartAddress" is not multiple of 32 or the
"StartAddress" is out-of-range (nothing was
performed); or "
Unit Note / Test Condition
Max.
4317 µs DIVIC = 00
11,379 µC DIVIC = 00
108
ROM Library Functions
, FLASH written with all bit 1
H
, FLASH written with all bit 1
H
Revision 1.0, 2011-12-15
SP37