Operating elements
3 („LOOP 3")
Service loop
Service loop 3 displays the monthly values.
...
The LCD displays the following values one after the other:
After the last display the previously selected set day is displayed once again.
Note: If the number of months to be read out is changed with the
service software, this will have an impact on the number of re-
trievable months in the LCD.
Head of the loop
...
Set day for July 2011
Energy on the set day
Tariff register 1 on the set day
Volume on the set day
Max. flow on the set day,
in 2-sec. cycles with date stamp
Max. power on the set day,
in 2-sec. cycles with date stamp
Max. temperatures on the set day,
in 2-sec. cycles with date stamp
MV for hot side or MR for cold side
Missing time count on the set day
20/49