Supply State; Update Software - Siemens OZW672 Series Commissioning Instructions

Restore default state
Notes
System data update
Note
Firmware update
Logo update
38 / 116
Siemens
Building Technologies
2.10

Supply state

The web server can be reset to factory default settings. This is probably a good
idea when using the web server for another plant.
Procedure:
1. Simultaneously press buttons Remote
for more than 6 seconds.
LED On turns off. The web server restarts.
2. Wait until the web server is operational (LED On
When restoring default state:
• All settings are reset to default (also applies to LPB/BSB device address
and Ethernet IP address).
• The device list is deleted.
• Uploaded files are deleted.
• Unsent messages are deleted.
• History data is not deleted (must be deleted manually; see Section 2.8).
2.11

Update software

We differentiate between the following:
• System definition updates to integrate device descriptions of new devices in the
web server.
• Firmware updates to update the web server to the latest firmware version. Firm-
ware updates may also contain new device descriptions (system definitions).
The web server supports a number of bus devices and differentiates them via de-
vice descriptions. A text catalog with various languages contains all web server
texts and device descriptions. The system data can be updated on site to add de-
vice descriptions for new devices or new languages retroactively.
A system definition update is a simply operational step via web browser that can.
See Section 3.4, part "Upload system definitions" for information on uploading.
Local operatings on web server required to update firmware so that remote update
is not possible. Procedures are communicated for any firmware update accordingly.
The logos can be customized. See Section 3.4, part "Upload logos" for information
on uploading.
Web server OZW672... V4.0
Commissioning
(6) and Service (7)
is green).
CE1C5712en
28.08.2012