Create Device Web - Siemens OZW672 Series Commissioning Instructions

Create device
websites
Note
Notes
Add device
Note
18 / 116
Siemens
Building Technologies
2.4 Create device web pages
You must first add associated devices and device websites before you can operate
the web server and the bus device. To this via the "Device web pages" menu.
Device web pages can only be created on the "Administrator" user level.
Linked devices are listed in a table with the following information:
• Device name
• Device address Device type
• Serial number
• State
• Generated on
• Click the column header to sort the table.
• Per default, the devices are sorted in ascending device address order.
• The web server itself is already in the device list.
• Only added bus devices are monitored.
• Only generated bus devices can be operated.
• Changes to settings of the connected bus device may require that the device
web pages be recreated or updated to apply changes from web operation.
• You must delete and re-add a bus device after you update the bus device soft-
ware, or replace the bus device.
You can only add a device on the "Administrator" user level.
The workflow below shows how to add a bus device and create the associated de-
vice web page(s):
1. Click [ Add ]
2. Enter the bus address:
LPB: Segment number and Device number.
3. BSB: Device number (default: 1=basic device).
4. You can add just one BSB device to the device list.
5. Click [ OK ] to confirm.
The web server searches for a device with the entered bus address. It is
displayed in the device list if found.
Web server OZW672... V4.0
Commissioning
CE1C5712en
28.08.2012