Comm Connection Settings - ZKTeco SpeedFace Series General User Manual

10.1.2 Comm Connection Settings

To develop the security and confidentiality of the attendance data, you need to set a connection password. Before
successful connection between the PC software and the device, the connection password must be input correctly.
On the "Network Settings" interface, tap on [Comm connection settings]:
Menu Options
It is used to gain the connection permission when using offline SDK or PULL SDK connection.
PC connection
If the password is not correct, the communication connection cannot be built. The value
Comm password
ranges from 0 to 999999. When the value is 0, there's no code status.
The ID ranges from 1 to 254. If the system is using the RS232/RS485 communication method,
Device ID
please input the device ID during software communication.
Function Description
114