Communication Settings; Ethernet Settings; Serial Comm. Settings - ZKTeco VF Series User Manual

5.

Communication Settings

In the initial interface, press
ethernet parameters such as IP address etc., Serial Comm., PC connection, Wireless Network and
Cloud Server Setting.
5.1

Ethernet Settings

When the device communicates with a PC over the Ethernet, you need to set network settings.
Press Ethernet on the Comm. Settings interface.
Menu Item
IP Address
Subnet Mask
Gateway
DNS
TCP COMM. Port
DHCP
Display in Status
Bar
5.2

Serial Comm. Settings

VF Series User Manual
> COMM. to enter communication setting interface. It Includes
The default value is 192.168.1.201, please adjust them according to the
The default value is 255.255.255.0, please adjust them according to the
The default value is 0.0.0.0, please adjust them according to the actual
The default value is 0.0.0.0, please adjust them according to the actual
The default value is 4370, please adjust them according to the actual
Dynamic Host Configuration Protocol, which is to dynamically allocate IP
addresses for clients via server. If DHCP is enabled, IP cannot be set
To set whether to display the network icon on the status bar.
Description
actual network situation.
actual network situation.
network situation.
network situation.
network situation.
manually.
P a g e | 14