ZKTeco SpeedFace Series General User Manual page 140

Menu Options
Verify display user
photo
Remaining
attendance Log Alert
Cyclically Delete ATT
Data
Cyclically Delete ATT
Photo
Cyclically Delete
Blacklist Photo
Verify Message
Display Delay
Face verification
interval
If it is enabled, the employee photo will be displayed; if not, the employee photo will not
be displayed.
When the remaining record space reaches a set value, the device will automatically display
a remaining record memory warning. When the value is set as 0, the function is disabled.
When the attendance record memory has reached full capacity, the device will
automatically delete a set value of old attendance records. When the value is set as 0, the
function is disabled.
When the space storing the attendance photos have reached full capacity, the device will
automatically delete a set value of old attendance photos. When the value is set as 0, the
function is disabled.
When the space storing blacklisted photos have reached full capacity, the device will
automatically delete a set value of old blacklisted photos. When the value is set as 0, the
function is disabled.
This is the length of time that an employee's information will display on the system's
screen after successful verification. Unit: seconds.
To set the facial template matching time interval as needed. Valid value: 0~9 seconds.
Function Description
135