ZKTeco SpeedFace Series General User Manual page 118

Menu Options
Enable Ethernet
Switch
DHCP
IP Address
Subnet Mask
Gateway Address
DNS
TCP COMM Port
When the device is connected to the network after setting the above parameters, the following page will display:
The connection succeeds, with status displayed on the icon bar.
Enable to modify the Ethernet network address parameters. If this is not enabled,
users cannot modify the Ethernet network address parameters.
Enable DHCP to assign an IP address to the internal network or network service
provider.
The default IP is 0.0.0.0; Changeable; IP address of the device and the PC are
connecting to the same network segment.
The default subnet mask is 0.0.0.0 (can be changed).
The default gateway address is 0.0.0.0 (can be changed).
The default address is 0.0.0.0 (can be changed).
The default TCP port is 4370 (can be changed).
Function Description
113