ZKTeco SpeedFace Series General User Manual page 146

Menu Options
Wiegand format
Wiegand out bits
Failed ID
Site code
Pulse width(us)
Pulse interval(us)
ID type
The Wiegand value could be 26bits, 34bits, 36bits, 37bits, 50bits.
After choosing the Wiegand format, you can select one of the corresponding output
digits in the Wiegand format.
If the verification is failed, the system will send the failed ID to the device and replace the
card number or personnel ID with the new ones.
It is similar to device ID except that it can be set manually and repeatable with different
devices. The default value ranges from 0 to 256.
The time width represents the changes of the quantity of electric charge with
high-frequency capacitance regularly within a specified time.
The time interval between pulses.
Users may be verified with the specific work codes and card numbers. If the device
supports alphabetical work codes, work code output will not be supported and only card
number output can be available.
Function Description
141