Junction Box Ic-318; Ac/Dc Power Supply Unit Pr-240 (Option) - Furuno Inmarsat Mini-C MES FELCOM19 Installation Manual

1. MOUNTING
1.3

Junction Box IC-318

The junction box IC-318 is connected to the communication unit by using the cable
assy 16S0344 (2 m, attached to the junction box). Install the junction box within 2 m
from the communication unit.
1. Remove four screws from the unit to separate the bottom chassis from the top
chassis.
2. Fix the bottom chassis to the mounting location with four self-tapping screws
(4x16, supplied).
3. Connect the cables referring to Chapter 2.
1.4

AC/DC Power Supply Unit PR-240 (option)

Fix the unit on a table with four self-tapping screws.
1-4
Junction box IC-318
AC/DC power supply unit