3. INITIAL SETTINGS
2. Select [Internet Protocol Version 4(TCP/IPv4)] and click the Properties button. If
the box to the left of [Internet Protocol Version 4(TCP/IPv4)] is not checked, place
a check-mark in the box.
3. Set the IP addresses within the following range. Setting range:
172.31.16.1,172.31.16.3 to 172.31.16.254
Note: Take care that do not use the same IP address as the default IP address.
(172.31.16.2 )
4. Establish the connection between the Communication unit and the PC with a LAN
cable. (locally supplied)
5. Turn the Communication unit on.
6. Click the icon for F19 PC. The [Connect List] appears.
7. Click the [No.] column of the item you wish to set up. A popup menu appears.
If the Connect list screen disappears during setup, do following procedure to show
the list.
3-4