Mqrsp11 Support Platform - Marquis Capri IDV34 Series Installation Instructions Manual

MQRSP11 Support Platform -Installation
MQRSP11 Parts List:
[1] Tray and 1 Pilot Shield*
[1] Glass Retainer (25-1/2" for IDV33) (30" for IDV43)
[2] Small Bags Lava Rock
[1] Bag 350 Ember
Preparation: Remove Grate Bar and replace screws. Remove Ember Plates. Do not remove existing Pilot Shield.
Installation: Install RSP by placing over burner. Use existing screws at front of firebox bottom to attach Retainer.
Pilot Shield should be
*
visually inspected monthly
for signs of deterioration
due to flame exposure.
Replace if necessary.
MQRSP 11
Lava Rock supplied with unit
may be used as a filler on sides
of firebox.
Place a thin layer of 350 Embers onto burner tube. Place Lava Rock over tray and on firebox bottom (left and right).
Do not cover pilot shield area. See Glass Ember Installation page for further details.
Base Unit (As Shipped)
Pilot Shield*
Retainer
Use existing screws to attach Retainer.
Retainer
350 Embers
WARNING: Failure
to position the parts in
accordance with these
diagrams or failure to use
only parts specifically
approved with this
appliance may result in
property damage or
personal injury.
37