Table of Contents
Advertisement
MQROCK2/ MQROCK3 -MQRSP4 (continued)
Step 4: Place Rocks #6 into position as shown above.
Step 6: Place Rocks #1 into position as shown above.
NOTE: If flame impingement on the rocks causes sooting then you may have to move, or remove, one or more
rocks. DO NOT PLACE ROCKS DIRECTLY OVER TOP OF THE BURNER TUBE.
Step 5: Place Rocks #3 into position as shown above.
Step 7: Place Rocks #3 and #4 into position as shown above.
Finished Rock Set and Burn
33
Hide quick links:
Advertisement
Table of Contents
