Cleaning, Care And Maintenance; Cannula Replacement - Inogen One G5 User Manual

Troubleshooting (Continued)
Problem
Concentrator does not
power on when On/Off
button is pressed
No oxygen

7. Cleaning, Care and Maintenance

Cannula Replacement

Your nasal cannula should be replaced on a regular basis. Consult with your physician
and/or equipment provider and/or cannula manufacturer's instructions for replacement
information. A single lumen cannula up to 25 feet in length is recommended to ensure proper
breath detection and oxygen delivery.
Case Cleaning
You may clean the outside case using a cloth dampened with a mild liquid detergent
(such as Dawn ) and water.
TM
Filter Cleaning and Replacement
The particle filters must be cleaned weekly to ensure the ease of air flow. Remove filters from the
front and back of the device. Clean the particle filters with a mild liquid detergent
(such as Dawn ) and water; rinse in water and dry before reuse.
TM
To purchase additional particle filters contact your equipment provider or Inogen.
Output Filter
The output filter is intended to protect the user from inhalation of small particles in the product
gas flow. The Inogen One® G5 includes an output filter conveniently located behind the
removable cannula nozzle fitting.
Under normal conditions the output filter could last the life of the product.
Possible Cause
Battery is discharged or no
battery is present
AC Power supply is not
connected properly
DC Cable is not connected
properly
Malfunction
Concentrator is not
powered on
Cannula is not connected
properly or is kinked or
obstructed
Recommended Solution
Use external power supply or
replace battery with one that
is fully charged
Check power supply
connection and verify green
light is solid
Check DC Cable connection
at the Concentrator and at
cigarette lighter or auxiliary
DC power source
Contact your equipment
provider
Press On/Off button to power
concentrator
Check cannula and its
connection to concentrator
nozzle
18