Page 1
INOGEN ONE G2 OXYGEN CONCENTRATOR TECHNICAL MANUAL 96-02735-00-01 Revision C CONFIDENTIAL and INOGEN ONE G2 OXYGEN CONCENTRATOR Page 1 of 20 96-02735-00-01 revC PROPRIETARY TECHNICAL MANUAL AMSR oxygenconcentratorstore.com 1-877-774-9271...
Page 2
This Manual applies to the following Inogen, Inc. products: • Inogen One G2 Oxygen Concentrator, model # IO-200 • Inogen Universal Power Supply, model # BA-107 & BA-207 • Battery, model # BA 200 • Battery, model # BA-224 CONFIDENTIAL and...
TABLE OF CONTENTS INFORMATION FOR PROVIDERS OF THE INOGEN ONE G2 ................. 4 1.1.......................... 4 AUTION AND ARNING TATEMENTS SETTING UP A PATIENT ON INOGEN ONE ......................6 2.1..........................6 ECOMMENDATIONS FOR 2.2............................6 YSTEM OMPONENTS 2.3.
Proper care in relaying this information will not only enhance the user’s experience with the Inogen One G2, but will also protect the patient, prolong the life of the device, and help you avoid unnecessary service calls and complaints from users.
Page 5
NOTE the equipment. A DESIGN NOTE indicates specific information regarding the design of the Inogen One G2 and/or accessories. This information is included in this manual to provide DESIGN NOTE you with a greater working understanding of the device. This information is not required to operate or maintain the Inogen One G2.
It supplies a high concentration of oxygen and is used with a nasal cannula to channel oxygen from the concentrator to the patient. You may choose to equip your patients with the Inogen One G2 so it may be used in home, institution, vehicle and various mobile environments.
+ (increase flow) or – (decrease flow) button. 7. Attach cannula to the metal hose barb located next to the handle of the Inogen One For further information regarding the use of the Inogen One G2, please consult the User Manual.
Page 8
NOTE is more closely linked to flow setting than to breathing rate. In general, the Inogen One G2 delivers 12ml per bolus per flow setting at 15 breaths per minute (180ml/min per flow setting). The following table summarizes the bolus...
3. SERVICING THE INOGEN ONE G2 3.1. Maintenance by the Provider 3.1.1. The Inogen One G2 is only intended to be repaired by authorized repair centers. If a repair is required, please contact Inogen to locate your nearest authorized repair center. If you would like to become an authorized repair center, please contact Inogen for access to certification training, service instructions, component part lists and the necessary repair equipment.
Page 10
10 microns. This filter is intended to protect the user from bacterial infection, and from inhalation of small particles in the product gas flow. The Inogen One G2 includes a product filter, conveniently located behind the removable cannula nozzle fitting. Inogen suggests that this filter be replaced between patients.
Page 11
To replace the Product Filter: 1. Use the Cannula Nozzle Fitting Tool (available from Inogen as RP-102) to access the product filter. The tool has two prongs which mate with two indentations located on the surface of the metal nozzle fitting on the Inogen One G2.
Page 12
• Charging Status 3.1.7. Data Download To download data from the Inogen One G2, you will need a USB mass storage device. If one of the following drives cannot be obtained, the drive must be less than 2GB in capacity and have a native file format of FAT32. The capacity of the drive and the file system alone do not ensure compatibility with the Inogen One G2.
3.2.2. Intake Filter Cleaning At the front of the Inogen One G2, ambient air passes through a gross particle screen that removes dust fragments. This particle screen must be cleaned on a weekly basis to ensure adequate air flow through the device.
Page 14
This charge typically takes 2 hours depending on the flow setting. The Inogen One G2 may be run on AC or DC power and used by the patient during this initial charging period Normal Charging The battery is operating properly when a battery icon is displayed on the LCD screen.
Page 15
(a) place the concentrator into a cooler environment, (b) charge the battery while the Inogen One G2 is turned off and plugged into an AC power outlet, or (c) remove the battery and charge using the External Battery Charger (optional accessory).
(extra charged battery or AC Power Supply). Storage Instruct patients to remove the battery from the Inogen One G2 when it is not in use to avoid inadvertent discharge. Leaving a battery attached to an idle Inogen One G2 for prolonged periods will result in battery damage that will severely shorten the expected life of the battery.
Molecular Sieve 36 to 60 months depending on usage Valves 20,000 run hours Intake Filter 20,000 run hours Cooling Fan 20,000 run hours 4. INOGEN ONE G2 SYSTEM SPECIFICATIONS INOGEN ONE G2 CONCENTRATOR Length Width Height No battery 27.2 10.7 22.2...
Degree of Safety for Application in Presence Not suitable for such applications of Anesthetic Gases: 5. INOGEN ONE G2 ERROR CODE TABLE If more than one alarm is triggered simultaneously, the error code number will be the sum of the error codes given below.
Page 19
A breath is detected, but no bolus Check for kinks or blockages in the Error is delivered tubing between the product manifold CONFIDENTIAL and INOGEN ONE G2 OXYGEN CONCENTRATOR Page 19 of 20 96-02735-00-01 revC PROPRIETARY TECHNICAL MANUAL AMSR oxygenconcentratorstore.com...
Need help?
Do you have a question about the ONE G2 and is the answer not in the manual?
Questions and answers
how to replace columns on inogen G2