Suzuki SWIFT Owner's Manual page 92

BEFORE DRIVING
the minute indication, push the indicator
selector knob (3).
(Selecting 12H/24H format)
• Switch the time indication between 12-
hour and 24-hour format by selecting
"Clock setting" in "Setting mode". Then,
select "12H" or "24H".
Door lock
(Door unlock setting) (if equipped)
You can choose either once or twice oper-
ation(s) to unlock all doors (including the
tailgate) by turning the key, or operating
the keyless push start system remote con-
troller or request switch.
You can also turn off or on the buzzer
sound when the door(s) is (are) locked or
unlocked.
Lights
(Lane change setting)
The turn signal and its indicator can be set
whether they flash three times even if you
return the turn signal control lever shortly
after operating it.
• To change the lane change setting,
select "Lane change" in "Setting mode".
Then, select "ON" or "OFF"
• If you want to change the number of
flashing, consult an authorized SUZUKI
dealer.
2-71
Antitheft
(Theft deterrent alarm system setting)
You can switch the theft deterrent alarm
system from the enabled state to the dis-
abled state, and vice versa.
The state of the theft deterrent alarm sys-
tem is shown on the information display as
follows:
• Mode A: Disabled state
• Mode D: Enabled state
IS A/C
(ENG A-STOP system setting)
• When using the automatic heating and
air conditioning system, you can select
one of the following engine auto stop
settings.
– Standard
– Economy
– Comfort
• When "Economy" is selected, engine
auto stop condition is eased, compared
with "Standard". Engine auto stop condi-
tion will occur more frequently, the stop
time will be longer, leading to reduction
of fuel consumption.
• When "Comfort" is selected, engine auto
stop condition becomes severe, com-
pared with "Standard". Engine auto stop
condition will occur less frequently, the
stop time will be shorter, leading to more
comfortable cabin condition by air condi-
tioner.
Display item
("Idling disp" setting)
You can switch whether the information
display shows the Eco-driving display
when the engine switch is pressed to
change the ignition mode to LOCK (OFF).
("Idling warn" setting)
You can switch whether the information
display shows the warning and indicator
messages related on the ENG A-STOP
system.
Default
(Initialization setting)
If you select "YES" and push the indicator
selector knob (3), all settings will be reini-
tialized.
57RK0-14E