Suzuki SWIFT Owner's Manual page 273

EXAMPLE
68PH00732
1) Open the engine hood while the engine
is stopped. To remove the bulb holder
of the front turn signal light or the front
position light from the light housing,
turn the holder counterclockwise and
pull it out.
EXAMPLE
(2)
(3)
(4)
(1)
68PM00721
(3) Removal
(4) Installation
2) To remove the bulb of the front turn sig-
nal light (1) from the bulb holder, push
in the bulb and turn it counterclockwise.
To install a new bulb, push it in and turn
it clockwise.
To remove and install the bulb of the
front position light (2), simply pull out or
push in the bulb.
INSPECTION AND MAINTENANCE
Side turn signal light
Outside rearview mirror type
LED is used. It is recommended that you
take your vehicle to an authorized SUZUKI
dealer for bulb replacement since special
procedures are required.
Fender type
Since the bulb is built-in type, replace it as
the light assembly. Remove the light
assembly by sliding the light housing left-
ward with your finger.
57RK0-14E
64J195
7-36