Suzuki SWIFT Owner's Manual page 30

BEFORE DRIVING
NOTICE
The remote controller is a sensitive
electronic instrument. To avoid dam-
aging the remote controller:
• Do not expose it to impacts, mois-
ture or high temperature such as
by leaving it on the dashboard
under direct sunlight.
• Keep the remote controller away
from magnetic objects such as a
television.
NOTE:
The keyless push start system may not
function correctly in certain environments
or under certain operating conditions such
as the following:
• When there are strong signals coming
from a television, power station or a cel-
lular phone.
• When the remote controller is in contact
with or covered by a metal object.
• When a radio wave type remote keyless
entry is used nearby.
• When the remote controller is placed
near an electronic device such as per-
sonal computer.
Some additional precautions you should
take and information you should be aware
of are:
• Check that the key is stowed in the
remote controller. If the remote controller
becomes unusable, you will not be able
to lock or unlock the doors.
2-9
• Check that the driver always carries the
remote controller.
• If you lose one of the remote controllers,
ask an authorized SUZUKI dealer as
soon as possible for a replacement.
Have an authorized SUZUKI dealer pro-
gram the new remote controller code in
your vehicle's memory so that the old
code is erased.
• You can use up to four remote control-
lers and the keys for your vehicle. Ask
an authorized SUZUKI dealer for details.
• The battery life of the remote controller
is about two years, but it can vary
depending on usage conditions.
52RM20080
To stow the key into the remote controller,
push the key in the remote controller until
you hear a click.
52RM20090
To remove the key from the remote control-
ler, slide the lock knob (A) in arrow direc-
tion and pull the key out from the remote
controller.
Request switch warning buzzer
The exterior buzzer beeps for about 2 sec-
onds in the following conditions to warn
you that the request switch is not working:
• The request switch is pressed after all
doors are closed with the ignition mode
changed to ACC or ON by pressing the
engine switch.
• The request switch is pressed in any of
the following conditions after changing
the ignition mode to LOCK (OFF) by
pressing the engine switch.
– The remote controller is left inside the
vehicle.
– Any door (including the tailgate) is
open.
57RK0-14E
) ( A