Suzuki SWIFT Owner's Manual page 81

How to use the setting mode:
1) When the ignition switch is in "ON"
position, and the vehicle is stationary.
2) Push and hold the indicator selector
knob (2) until the display shows
" ".
3) Turn and/or push the indicator selector
knob (2) to select a function that you
want to set up according to the chart in
the previous page.
4) Turn and/or push the indicator selector
knob (2) to register settings of the fol-
lowing functions.
EXAMPLE
68PM00272
NOTE:
• As shown in the above illustration, "
indicates on the display of currently set-
ting item.
• To go back to the higher level display
during operation, turn the indicator
selector knob (2) to display "
" " and then push the indicator
selector knob (2).
Time indication of clock "
• : 12-hour format (default set-
ting)
• : 24-hour format
Central door locking system "
(if equipped)
• : Unlock all doors by turning
the key once
• : Unlock all doors by turning
the key twice (default setting)
Additional flashes of the turn signal
" "
• : Turn signal flashes
times after the turn signal
lever is returned (default set-
ting)
• : Disable the additional flashes
of turn signal
Security system " " (if equipped)
• : Enable the security system
"
(default setting)
• : Disable the security system
Initialization setting "
• : Initialize all settings
" or
How to exit the setting mode:
Switch the display to show "
push the indicator selector knob (2).
BEFORE DRIVING
"
"
three
"
" and then
2-60
57RK0-14E