Suzuki SWIFT Owner's Manual page 253

WARNING
(Continued)
To minimize your exposure to used
oil, wear a long-sleeve shirt and
moisture-proof gloves (such as dish-
washing gloves) when changing oil. If
oil contacts your skin, wash thor-
oughly with soap and water.
Launder any clothing or rags if it is
with oil.
Recycle or properly dispose of used
oil and oil filters.
5) Reinstall the drain plug with new gas-
ket. Tighten the plug with a wrench to
the specified torque.
Oil filter replacement
1) Using an oil filter wrench, turn the oil fil-
ter counterclockwise and remove it.
2) Using a clean rag, wipe off the mount-
ing surface on the engine where the
new filter will be seated.
3) Smear a small amount of engine oil
around the rubber gasket of the new oil
filter.
4) Screw the new filter by hand until the fil-
ter gasket contacts the mounting sur-
face.
(1) Loosen
(2) Tighten
INSPECTION AND MAINTENANCE
Tightening (viewed from filter top)
(1) Oil filter
(2) 3/4 turn
NOTICE
To tighten the oil filter properly, it is
important to accurately identify the
position at which the filter gasket
first contacts the mounting surface.
54G092
54G093
7-16
57RK0-14E