Suzuki SWIFT Owner's Manual page 123

Manual transaxle
Turn to "LOCK"
Push
• Manual transaxle vehicles
You must push in the key to turn it to
"LOCK" position. It locks the ignition, and
prevents normal use of the steering
wheel after the key is removed.
• CVT vehicles
The gearshift lever must be in "P" (Park)
position to turn the key to "LOCK" posi-
tion. It locks the ignition and prevents
normal use of the steering wheel and
gearshift lever.
To release the steering lock, insert the key
and turn it clockwise to one of the other
positions. If you have trouble turning the
key to unlock the steering wheel, try turn-
ing the steering wheel slightly to the right
or left while turning the key.
ACC
Accessories such as the radio can oper-
ate, but the engine is off.
ON
This is the normal operating position. All
electrical systems are on.
START
This is the position for starting the engine
using the starter motor. The key should be
released from this position as soon as the
engine starts.
Ignition key reminder
60G033
A buzzer sounds intermittently to remind
you to remove the ignition key if it is in the
ignition switch when the driver's door is
opened.
OPERATING YOUR VEHICLE
81A297S
WARNING
• Never return the ignition switch to
"LOCK" position and remove the
ignition key while the vehicle is
moving. The steering wheel will
lock and you will not be able to
steer the vehicle.
(Continued)
57RK0-14E
3-4