Connection And Maintenance; Rear Panel Connection - Icom IC-F9511S Instruction Manual

3

CONNECTION AND MAINTENANCE

n Rear panel connection
Antenna
y DC POWER RECEPTACLE
Connects to a 12 V DC battery. Pay atten-
tion to polarities. NEVER connect to a 24 V
battery. This could damage the transceiver.
Red
12V
Battery
14
q ANTENNA CONNECTOR
Connects to an antenna.
Contact your dealer about
antenna selection
placement.
q
t
Black
R CAUTION! NEVER remove
t h e f u s e - h o l d e r f r o m t h e D C
power cable.
w Reserved for a
future function.
e EXTERNAL
and
SPEAKER JACK
Connect a 4–8 ø
external speaker.
w e
y
NOTE: Use the terminals as shown
below for the cable connections.
Crimp
Supplied speaker SP-22
(IC-F9511T only. IC-F9511S have
a built-in speaker.)
r
r MICROPHONE HANGER
Connect the supplied mi-
crophone hanger to the
vehicle's ground for micro-
phone on/off hook func-
tions. (See p. 2)
t IGNITION LEAD
Connects to a ignition line.
Solder
R Do not put a pressure to
this lead.
Binding to the DC power
cable is recommended.