Programmable Function Keys - Icom IC-F9511S Instruction Manual

y BELL INDICATOR
A ppears/blinks when the specific 2-tone code is received,
according to the pre-programming.
u CALL CODE MEMORY INDICATOR
A ppears when the call code memory is selected.
i SDM MEMORY INDICATOR
A ppears when the SDM memory is displayed.
o SDM INDICATOR
A ppears when an SDM is received, or a transmit SDM is
selected.
!0 ALPHANUMERIC DISPLAY
D isplays an operating channel number, channel name,
Set mode contents, DTMF code, etc.
The indication mode can be selected from 1 line or 2
lines. Ask your dealer for details.
In this instruction manual, the LCD illustration is de-
scribed using the 2 lines indication mode.
!1 ACTIVATED KEY INDICATOR
A ppears above the key assigned as [DIGITAL] key when
that key has been activated.
PANEL DESCRIPTION
n Programmable function keys
The following functions can be assigned to [DIAL]*, [UP],
[DOWN], [P0], [P1], [P2], [P3] and [P4] programmable func-
tion keys.
Consult your Icom dealer or system operator for details con-
cerning your transceivers programming.
If the programmable function names are bracketed in the fol-
lowing explanations, the specific key is used to activate the
function depends on the programming.
* The functions you can assign to [DIAL] are limited.
(Only functions marked with ✩ can be assigned.)
✩ CH UP AND DOWN KEYS
➥ Push (or Rotate)* to select an operating channel.
➥ Push (or Rotate)* to select a transmit code channel after
pushing [TX Code CH Select].
➥ Push (or Rotate)* to select a DTMF channel after pushing
[DTMF Autodial].
➥ Push (or Rotate)* to select a scan group after pushing
and holding [Scan A Start/Stop]/[Scan B Start/Stop].
➥ Push (or Rotate)* to select an Individual ID code or Talk-
group ID code after pushing [Individual] or [Talkgroup].
* Rotate when this function is assigned to [DIAL].
✩ ZONE UP AND DOWN KEY
Rotate to select the desired zone.
1
(This function is for [DIAL] only)
1
3