Status Of The Virtual Drive; Status Of The Physical Drive - Hitachi 220H Bios Manual

Status
This section describes statuses of virtual drives / physical drives displayed in
MegaRAID WebBIOS.

Status of the virtual drive

Here is a list of statuses for disk arrays.
Table 2-23: Statuses for disk arrays
Status
Optimal
Partially Degraded
Degraded
Offline

Status of the physical drive

Table 2-24: Status of the disk
Status
Online
Offline/Failed
Rebuild
Global Hot Spare
Dedicated Hot Spare
Unconfigured Good
Unconfigured Bad
Missing
Normal. The virtual drive is operable.
One physical drive fails in a RAID 6 virtual drive.
One physical drive fails in a RAID 1, 5, or 10 virtual drive.
The virtual drive is inoperable because of either failures in multiple drive s in
a redundant disk array or a failure in a drive in a non-redundant disk array.
Normal.
A fault has occurred.
The physical drive is separated from the disk array due to a failure.
Rebuilding is underway.
The physical drive is set as a global hot spare.
The physical drive is set as a dedicated hot spare.
This is not used for a disk array.
A fault has occurred.
The unrecognizable disk is restored to recognizable.
A fault has occurred.
A "normal" disk has been removed.
MegaRAID WebBIOS
Hitachi Compute Rack 210H/220H BIOS Guide
Description
Description
2-77